Paver Power Washing
Power washing for your driveway
AF Paver
Power Washing
Full-service paver pressure / power washing in American Fork, UT
Call for a free estimate today at 801-877-1793
Our Driveway Power Washing Solutions
Power Washing For Your Pavers
Paver Power Washing
- Driveways
- Walkways
- Patios
- Decks
- Dirt Removal
- Stain Removal
- Oil Removal
- Grease Removal
The Benefits of Paver Power Washing
Mold, weeds, and debris may accumulate between pavers, causing them to break down. What you need is paver power washing to bring it up to speed.
Our team has been dealing with paver power washing projects for decades and would be more than glad to help you. We’ll get rid of the weeds and grass that are growing in the joint sand. We’ll also prevent regrowth by removing the weeds from the roots.
While it is feasible to wash your pavers on your own, there are several potential pitfalls. If your patio, driveway, or pool deck has gathered stains, grease, corrosion, or efflorescence over time, our paver specialists will know how to remove it. Also, the paving stones are sometimes beginning to show their age; you might consider paver pressure washing for them.
Paver Pressure Working by Seasoned Experts
Having your pavers maintained by a professional is a safe bet. It’s well worth the money to get the paver power washing done by a professional because of all its advantages. You may extend the life of your pavers with a minor investment. It also increases the value of your home.
Contact us if you need more info on how we can help you with power washing pavers.
Pavers for patios and driveways become soiled over time and develop moss, weeds, and black mold. The majority of paver owners consider either renting a pressure washer from their neighborhood hardware shop or hiring a pressure washing business to clean their pavers. We strongly advise against pressure washing concrete pavers unless you are very experienced and have the proper equipment because doing so can easily harm the surface finish, especially on newer pavers.
Typically, a jet style tip is needed to clean pavers with a pressure washer. The surface will be readily harmed by this pressure. Generally speaking, using a fan tip won’t hurt, but you probably won’t get the level of cleanliness you want.
Professional Driveway Paver Washing
Should You Power Wash Your Pavers
You may have wondered, “Can you pressure wash pavers?” if you’ve given your pavers a lot of thought in terms of the best ways to clean them.
Your patio, walkway, or driveway can be built out of pavers, which are a terrific way to make a functional area that also enhances the curb appeal of your house. However, time can make anything look dingy and unsightly, including your pavers. Fortunately, there are numerous methods for cleaning your pavers and restoring their original beauty.
Sweep Them First
Although you can pressure wash pavers, they don’t always need it. The bulk of dirt that accumulates on your pavers may be cleaned off with just a broom, water, soap, or scrub brush. You might be able to get by with little more than a garden hose fitted with a high-pressure nozzle, even if you need the assistance of a focused stream of water to restore your pavers to their original appearance.
It’s a good idea to attempt these less strenuous techniques before turning to a power washer to clean your pavers. After all, while a power washer can be used to clean your pavers, doing so isn’t always essential and, if handled incorrectly, could result in paver damage.
Can You?
Your pavers can be pressure washed, yes. Although using a pressure washer is straightforward once you get the hang of it, untrained or inexperienced users run the risk of easily damaging their pavers by using a stream that is too strong, getting too near with the wand, or making any number of other rookie errors.
Lines, pits, and other surface damage to your pavers may result from these errors. Additionally, improper use of a pressure washer might blow out any mortar that may be keeping your pavers together. Therefore, bear these points in mind before grabbing your pressure washer and trying to blast any dirt clinging to your pavers.
Should You?
Consider doing the following before you start power washing.
Try out the power washer. It’s a good idea to test a power washer on some dirt or stone before using it on your pavers if you’re renting one or are otherwise unexperienced. Instead of leaving an unattractive scar on one of your pavers, it is preferable to blast a piece out of a rock that is already uneven. Before using a power washer on a patio or sidewalk, be sure you know how to use it and have control of it.
Set the controls properly. Make sure it provides three to four gallons per minute at 3,000 psi or less in pressure. Additionally, it’s a smart idea to pick a nozzle that produces a wide-angle stream to distribute the force across a larger region. Your pavers will be less likely to sustain damage if you do this.
Wash your pavers with pressure. It’s time to start washing up your pavers once you’ve grown comfortable with your power washer and verified that the settings are accurate. Use broad, sweeping motions and keep the tip of the wand at least one foot away from the pavers to prevent the water from lingering in one spot for too long. Additionally, take care not to spray water straight into the joints of your pavers as this can scatter sand.
You may use your pressure washer to restore the new appearance of your pavers if you keep these items in mind and adhere to these simple recommendations.